EYETREK FIRMWARE

Update/Reset Instructions

You can update Olympus EyeTrek by downloading the latest firmware or factory reset data.
Please follow the below instructions:

Precautions

  • Please make sure that battery is fully charged.
  • Please do not turn off power when updating.
  • Once updated you cannot downgrade to an older version. If you reset to factory default settings all user data will be deleted.

Notes

You need to install the Android Debug Bridge (ADB) on your PC in advance in order to use EyeTrek Utility.

You need to install the EyeTrek Android USB Driver so that the PC can recognize Olympus EyeTrek. Please see the instruction manual for the Olympus EyeTrek Utility for details.

You will need to download the Olympus EyeTrek Utility and install it on your PC in order to update the Olympus EyeTrek firmware. By clicking the Download button below, you are agreeing to the Software License Agreement.

Please download the latest version of EyeTrek Utility to your PC in advance

DOWNLOAD THE OLYMPUS EYETREK UTILITY

Firmware Update

  1. Download the latest firmware.

    FIRMWARE DOWNLOAD

  2. Unzip the downloaded Firmware Zip file in any folder.
  3. Run the Olympus EyeTrek Utility.
  4. Connect the Olympus EyeTrek to PC using USB cable.
If the EyeTrek is recognized correctly, serial number of the connected EyeTrek will be shown.

  1. Select [Reset/Update].
  2. Select the folder where you stored the latest firmware file (update_xxxx_xxxx_xxxx_xxxx.ieau) in step 2 by clicking the folder selection icon in [ Select folder for firmware updates ].
  3. Press [ Update ] to start Firmware Update.


Precautions

During Firmware Update, the below process will be conducted. It will take some time and EyeTrek will restart automatically when update is completed.

  1. Firmware Transfer (1 min)
  2. Automatic Restart of EyeTrek
  3. Firmware Update (8 mins)
LED of EyeTrek will blink when updating
  4. Automatic Restart
  5. Update Completed

Please do not turn off the EyeTrek’s power until the update is completed.

You cannot downgrade to an older version of the firmware.

Firmware Reset

  1. Download the Reset Firmware.

    FIRMWARE DOWNLOAD

  2. Unzip the downloaded Firmware Zip file in any folder.
  3. Run the Olympus EyeTrek Utility.
  4. Connect the Olympus EyeTrek to PC using USB cable.
If the EyeTrek is recognized correctly, serial number of the connected EyeTrek will be shown.

  1. Select [Reset/Update].
  2. Select the folder where you stored the Reset Firmware (update_xxxx_xxxx_xxxx_xxxx.ieau) in step 2 by clicking the folder selection icon in [Select folder for firmware updates].
  3. Press [ Update ] to start Reset of Olympus EyeTrek


Precautions

During Reset, the below process will be conducted. It will take some time and EyeTrek will restart automatically when reset is completed.

  1. Reset Data Transfer (1 min)
  2. Automatic Restart of EyeTrek
  3. Reset (7 mins) LED of EyeTrek will blink when resetting
  4. Automatic Restart
  5. Reset Completed

Please do not turn off the EyeTrek’s power until reset is completed.

Firmware will be based on factory settings.

All user application and contents will be deleted.

Capture your stories.