$12 Flat Rate Shipping + Free Shipping on Orders $150 & Over!
SHOP THE OLYMPUS STORE
The FL-600R is an easy-to-use, external flash unit with a wide LCD display and wireless control capabilities. It features a built-in LED light that can function as an AF illuminator for still images or as full-time auxiliary lighting for shooting movies. As a bounce flash, the FL-600R tilts upward to 90 degrees and downward to 7 degrees, and it can swivel side-to-side up to 180 degrees in each direction. A wide panel and catch light plate are built into the unit, so you won't misplace them when traveling. Flash settings can be adjusted using the arrow keys and dial on the back of the unit or via the controls on an attached camera.
In wireless mode, the FL-600R has a built-in *commander function to remotely fire other wireless flash units without firing itself, but it can also be used as a slave flash, controlled by a camera's built-in flash or by another commander unit. Up to three groups of flashes, plus a clip-on flash such as the FL-LM2, can be configured independently. Four wireless channels are available, which prevents interference from other photographers' flashes. In addition to the wireless option, the flash can be attached and locked securely onto a camera's hot shoe or mounted externally using a compatible flash bracket and cable, such as the FL-BK01, FL-BKP02, FL-BKM03 or FL-BK04.
Powered by four AA alkaline or NiMH batteries, the FL-600R's charging time is approximately half as long as that of the FL-50R.
Includes flash stand, soft case, instruction manual and warranty card.
* Note: The commander mode function is currently only available on the EM-5.
Wireless mode is not fully functional with the PEN E-P1\E-PL1\E-P2\E-PL2, or the E-1 or Evolt 300\330\410\500\510. Wireless Mode only works in Manual mode on the flash, not TTL. The flash will provide TTL when mounted directly on these models.
Note: Wireless TTL mode is possible with the SP-560UZ\SP-565UZ\SP-570UZ\SP-590UZ. These models do not have a hotshoe. The firmware of the SP-560 UZ must be updated to provide this functionality. Firmware updates can be downloaded and installed via Olympus Camera Updater software.
Before submitting your review, please note the following: